[Elecraft] Xmit Audio Problem

[Don Wilhelm]

Bob,

If you are measuring a 100 watt signal with a 2500 watt slug, you can 
expect significant errors.
Even the Bird slugs (right after calibration) offer only a 5% of full 
scale accuracy.  With a 2500 watt slug, that means a possible error of 
+/- 125 watts at any point on the scale.
For best results, use a slug that is as close to the maximum power that 
you expect as possible.

73,
Don W3FPR

On 5/26/2014 11:11 PM, Bob KD7YZ wrote:
> On 5/26/2014 15:07, tnnyswy at yahoo.com wrote:
>
>> 10% of Average, or Peak Envelope Power?
>> Are you using  a PEP Watt meter?
>>
> A coaxial-dynamics WM with a 2500 slug
>