[Elecraft] [K2] No int. spkr audio

[Petr Ourednik]

Hi Don,

Mni thanks! I am going to check it with daddy by phone call. Hope it
will not be anything worse...
He is nervous that his K2 is sick. :(

I will let You know abt results. 

73 - Petr, ok1rp


On Mon, May 26, 2014, at 04:57 PM, Don Wilhelm wrote:
> Petr,
> 
> The most likely cause is the switch lever inside the headphone jack.  
> The switch is the 3 contacts closest to the rear of the K2 RF Board.
> 
> Replacement of the headphone jack is the normal fix (Elecraft PN
> E620028).
> 
> If you want to try a temporary fix (the speaker will be active all the 
> time), you can solder a jumper between the center solder pad of that 
> switch to the solder pad to the right.
> While you have that temporary fix in place, the speaker can be silenced 
> by placing an unwired 3.5mm plug (either mono or stereo) into the 
> external speaker jack.
> 
> 73,
> Don W3FPR
> 
> On 5/26/2014 10:33 AM, Petr Ourednik wrote:
> > Hello
> >
> > Sorry for bothering with maybe stupid task...
> >
> > My daddy called me this morning that he has no audio on his K2 from
> > internal speaker. When he plug in the phones it works. (Yda evening int.
> > spkr worked too)
> >
> > Is it the problem of switching contact inside of the Phones socket on
> > the front panel or it can be issue somewhere else please?
> >
> > I have no K2 on the table and I did not found so much in the manual...:(
> >
> > Thank You for hints.
> >
> > 73 - Petr, ok1rp
> > K2/4800
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to w3fpr at embarqmail.com
> >
>