[Elecraft] K3 issues - new modules installed - 250 Hz filter, DVK, KXV3A

[Bruce Beford]

I forgot to mention- the DSP error messages- you had to disassemble the
front panel assembly to install the DVK. You may not have that stack
properly re-assembled, leading to some of the DSx error messages. You may
have to remove the front panel assembly again, to inspect your work there.
73,
Bruce N1RX

-----Original Message-----
From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Mark
Pride via Elecraft
Sent: Friday, May 23, 2014 7:22 AM
To: Elecraft at mailman.qth.net
Subject: [Elecraft] K3 issues - new modules installed - 250 Hz filter,
DVK,KXV3A

Hello all,

Ran into some issues with the K3 after adding some new boards.  Here is the
sequence of screens on the radio as I move to get it going again.

Few more experiences - And added some more notes in the first email below.

On SSB, it transmits okay, no ERR on screen.  When I just send a short
message on CW, it transmits, then the next time it shows this series of ERR
messages.  By pushing any button on the radio, it returns to normal screen,
showing VFO A and B (smaller print size), then transmit again, ERR TxF and
no output power after that first burst of RF.

I have swapped power supplies - same problem.

Let me describe the sequence of events and what I see on the screen.


Power up: E 020202 (main VFO line)
under that:  ERR DSE (VFO B info)

E 020202
under that "call sign"  (VFO B info) scrolling

E 020202
under that:  ERR DSE

Press the A/B button (actually press any button)

14.232.32
under that ERR DS3

Press the A/B button

14.232.32
under that ERR BP2

Press the A/B button

14.232.32
ERR BP3 (pressing the button changes the type of ERR showing?  DS3, BP2,
BP3, IF2, etc)

Press A/B button

14.232.32
ERR IF2

Press A/B button

14.032.00
under that 14.232.32 

Transmit on CW (short burst - then nothing - no more TX)

14.032.00
ERR TxF

No transmitter power after that first burst of RF.



Had some trouble getting the radio to be read by the N1MM program, but
eventually got that going.  But does not appear to be stable, frequent N1MM
message saying to retry connecting the radio, etc.
 
Regards,
Mark, K1RX
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to beford at myfairpoint.net