[Elecraft] N1MM and keying KX3. What happens to the slashes // Solved

[Nr4c]

Simple two by two tenth inch plugs wired to a 3.5mm inline jack for front paddle plug. Pinout on Fred's book. 

Sent from my iPhone
...nr4c. bill


> On May 22, 2014, at 4:29 PM, Jim Brown <jim at audiosystemsgroup.com> wrote:
> 
>> On 5/22/2014 12:51 PM, Pete Smith N4ZR wrote:
>> I understand that the KX3 does not have the K-3's built in CW and PTT interfaces on the RS-232 port, but it is really trivial to take off the DTR and RTS lines from the RS-232 cable and through a couple of one-transistor, one-resistor interfaces to the appropriate ports
> 
> Yes, I've built several of them.  The tricky part, though, is simultaneously interfacing a paddle to send fills.
> 
> 73, Jim K9YC
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nr4c at widomaker.com