[Elecraft] N1MM and keying KX3. What happens to the slashes // Solved

[Pete Smith N4ZR]

I understand that the KX3 does not have the K-3's built in CW and PTT 
interfaces on the RS-232 port, but it is really trivial to take off the 
DTR and RTS lines from the RS-232 cable and through a couple of 
one-transistor, one-resistor interfaces to the appropriate ports

73, Pete N4ZR
Check out the Reverse Beacon Network at
http://reversebeacon.net,
blog at reversebeacon.blogspot.com.
For spots, please go to your favorite
ARC V6 or VE7CC DX cluster node.

On 5/22/2014 11:50 AM, Hans J Rasmusen OZ7BQ wrote:
> Thanks for the response. The solution is simple. N1MM appears no to support the KX3 (K2 and K3) Command Set in full.
> If you want to avoid the double slashes // in callsigns, you have to use the standard N1MM key commands and a Keying interface like WinKeyer USB. More to carry if you go portable, but may be easier if you participate in a CW contest.
>
> 73 and enjoy the forthcoming WPX CW contest.
> OZ7BQ Hans Jørgen (Joe).
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n4zr at contesting.com
>