[Elecraft] K3 Diversity with 2 RX antennas

Oliver Dröse droese at necg.de
Thu May 22 13:42:35 EDT 2014


No. You need to select RX ANT on one RX and AUX on the other RX. 
Otherwise you will hear the same signal in both ears, namely that of the 
RX ANT input. ;-)

73, Olli - DH8BQA

Contest, DX & radio projects: http://www.dh8bqa.de


Am 22.05.2014 14:15, schrieb Don Wilhelm:
> Ken,
>
> Yes, that is how you would set it up - you need to select RX ANT for 
> both the ain and the SUB.  And yes, you hear what is on the main in 
> one ear and what is on the SubRX in the other ear (unless you mix them 
> with the L-MIX-R settings in the CONFIG menu).
>
> 73,
> Don W3FPR
>
> On 5/22/2014 6:05 AM, Ken Widelitz wrote:
>> How would I set up the K3 in diversity mode with two different RX only
>> antennas? One to the RX antenna and one to the AUX RF? Would going into
>> diversity mode with that setup get me one RX antenna in one ear and the
>> other RX antenna in the other?
>>
>>
>> 73, Ken, K6LA / VY2TT
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to w3fpr at embarqmail.com
>>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to droese at necg.de
>



More information about the Elecraft mailing list