[Elecraft] K2 mobile,

[Fred Townsend]

Vic the Array Soltions arrester looks like a good part but I believe you should be running a UnUn, such as the W1JR-50-1 mobile. It costs a little more but will take care of RF getting back into the cab and arrest static. Just my 2 cents.
73
Fred, AE6QL

-----Original Message-----
>From: Vic Rosenthal K2VCO <k2vco.vic at gmail.com>
>Sent: May 21, 2014 11:52 AM
>To: elecraft at mailman.qth.net
>Subject: Re: [Elecraft] K2 mobile,
>
>I use lightning protection devices formerly made by ICE, which are very 
>effective for any kind of static discharge. They are now produced and 
>sold by Array Solutions. You can see a picture and schematic here:
><http://www.arraysolutions.com/Products/surge_arrestorAS-3xx.htm>
>
>On 5/21/2014 10:19 AM, randyowen wrote:
>> Would like some ideas for static bleeding, run a semi truck mobile,and have
>> had problems with d16 and17 in the kpa100 from static, Don W. Has given me a
>> homebrew idea, but also wondering if there is any good commercial products
>> made to go across the feed line. Thanks
>
>-- 
>73,
>Vic, K2VCO
>Fresno CA
>http://www.qsl.net/k2vco/
>
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>Message delivered to fptownsend at earthlink.net