[Elecraft] KX3 2M Question

[Phil Genera]

http://www.elecraft.com/manual/KX3-2M%20FAQ.htm

"*Q:*  *What is the frequency stability?*



"A: Standard (uncompensated) frequency stability is sufficient for FM or AM
operation. For CW/SSB/data use, it will be necessary to perform the KX3's
extended VFO temperature compensation procedure, providing typical
stability of about ± 10 Hz on 2 meters. This range is compatible with
170-Hz-shift RTTY but is not compatible with many narrowband modes,
including JT65 and WSPR.wband modes, including JT65 and WSPR."

-- 
Phil
kj6pon


On Mon, May 19, 2014 at 12:36 PM, Ron <mongoose1951 at googlemail.com> wrote:

> Hi,
>
> Is any special calibration required, specifically the Temp Compensation
> required for basic voice FM/SSB use when installing the 2M option?
>
>
>
> 73
>
> Ron
>
> AF1Q
>
>
>
>
>
>
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to pg at fivesevenfive.org
>