[Elecraft] I got big heavy knobs...

[David Cole]

Slave et al.,
Thanks for the tip on the knobs.  I  have set mine to be a bit tighter
than they were on the felt!

-- 
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
for MM-SSTV see:
http://groups.yahoo.com/neo/groups/MM-SSTV/info


On Mon, 2014-05-19 at 00:19 -0400, Slava Baytalskiy wrote:
> Thats exactly how i did it. I'm actually using both felt washers on the VFO A and one on VFO B.
> I have the regular (all black) knob set from 73cnc.com (couldn't wait till Dayton to get the deluxe).
> But they are great.
> Did you know these guys picked up the K8RA's keys business?
> I just got my P4 iambic from them on Saturday at Dayton.
> __________________
> Slava (Sal) B, W2RMS
> W2RMS at arrl.net
> 
> On May 18, 2014, at 11:39 PM, Don Wilhelm <w3fpr at embarqmail.com> wrote:
> 
> > David,
> > 
> > The bearings in the encoder should be able to handle the added weight of the knob.
> > However, there is one caviat - some users of that knob want to mount it with no drag on the knob so they can "spin" it.  That means that there is no contact with the felt washer, and the weight of the knob is like a heavy lever placed on the end of the encoder shaft which would have a tendency to bend the shaft.
> > 
> > If the knob is mounted so there is adequate contact with the felt washer, the knob will be supported and should not cause any problem.
> > 
> > Bottom line, position the knob so there is normal drag produced by the felt washer.
> > 
> > 73,
> > Don W3FPR
> > 
> > On 5/16/2014 11:53 AM, David Cole wrote:
> >> Hi all,
> >> 
> >> I have just purchased a set of those all metal knobs for my K3...  I did
> >> not really realize just how heavy they were...
> >> 
> >> The thought then occurred to me that the encoder shafts for both the
> >> main and the sub tuning may not be able to take the additional weight...
> >> Is this a valid worry?  If you are using these knobs, how long have you
> >> had them on?
> >> 
> >> 
> > 
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft at mailman.qth.net
> > 
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to slavka at nullserv.com
>