[Elecraft] KXPA100 f/w 1.28 now production released

[Matt VK2RQ]

Elecraft is right on top of it; I'm also confident we'll have a solution fairly soon.

73,
Matt VK2RQ

> On 17 May 2014, at 1:52 pm, Ron Cowherd <roncowherd at aol.com> wrote:
> 
> Yes, I have also had similar problems with the KXPA100 (SN#0876)and have already composed and sent a letter to support.  The letter is much too detailed to reproduce here but I also suspected a firmware glitch.  My unit was working flawlessly until the upgrade.  I'm sure the problem will soon be solved.  
> 
> 73, Ron K4GYD
> 
> Sent from my iPad
> 
>> On May 16, 2014, at 6:56 PM, Matt VK2RQ <matt.vk2rq at gmail.com> wrote:
>> 
>> How are people finding this new firmware?
>> 
>> I've been having problems recently with my KXPA100, where it intermittently shows high SWR for a brief moment, and then either recovers or puts itself in bypass. At first I thought I had an issue with my antenna, but I discovered it was happening with a dummy load too. It mostly happens on SSB, but it happens to a lesser extent CW. It also happens with both my KX3 with integrated cable, and with my K2 using the keying line. I pulled the amp apart, looking for poor connections and dry joints, but no success there. By gently blowing across the mike, I was able to get it into the failure mode, and stay there. The SWR bridge in the amp was reading high. I had a crossneedle SWR meter between the radio and the amp, but as I blew progressively harder into the mike, the SWR on the meter was low. Then, once the power applied reached a certain level, the amp would come good again. This made me suspect whether the band auto-sensing may have been switching in a wrong LPF?
>> 
>> Then last night, I reflashed the amp with release firmware 1.28, but still had the problem. Then I downgraded the firmware on the amp from 1.28 to 1.09, which was the release my amp was shipped with. I haven't observed or been able to reproduce the problem since. This is now leading me to suspect a possible bug in the 1.28 firmware?
>> 
>> I'm wondering if anyone else may have observed any strange glitches with the 1.28 firmware?
>> 
>> 73, Matt VK2RQ
>> 
>>> On 3 May 2014, at 2:14 am, Eric Swartz - WA6HHQ, Elecraft <eric at elecraft.com> wrote:
>>> 
>>> KXPA100 Production Firmware MCU 1.28 has been released to production status and is now shipping.
>>> 
>>> Important: This version of firmware has new features that require the very latest KXPA100 Utility.
>>> 
>>> We recommend all KXPA100 owners upgrade to the latest KXPA100 utility and to KXPA100 MCU 1.28.
>>> 
>>> 
>>> Some of the Key Changes in this release:
>>> 
>>> - Better tolerates forward and reflected power overshoot for brief periods to support external antenna tuners. Use approximately 10-20 watts of KXPA100 output when tuning.
>>> 
>>> - When the attenuator is acquired because of SWR or high reflected power, release attenuator immediately on next key up if SWR has been reduced to 3:1 or less.
>>> 
>>> - Update band voltage tables for ICOM 703 and Yaesu FT-817
>>> 
>>> - Reduce power required for ATU tune.
>>> 
>>> - Add per-band Antenna configuration (requires the new KXPA Utility for user interface)
>>> 
>>> - Improved RS232 handling for 3rd party applications. (Ham Radio Deluxe v6.2, PigKnob, etc.)
>>> 
>>> 
>>> 73,
>>> Eric
>>> elecraft.com
>>> 
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft at mailman.qth.net
>>> 
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>> Message delivered to matt.vk2rq at gmail.com
>> 
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to roncowherd at aol.com