[Elecraft] K3 KX3 running winmor

[Tim Tucker]

I know that it's "best practice" to use DATA A mode for digital, but I use
Winmor all the time in SSB mode and don't run into any problems.  I don't
even bother turning off the compression and EQ, either.  Have you tried it
this way, and if so what has your experience been?

Tim
AE6LX



On Fri, May 16, 2014 at 7:54 AM, K7JLTextra <k7jltextra at gmail.com> wrote:

> I run Winmor on my K3 & KX3 and find it very frustrating that Winmor
> resets the mode back to SSB with each automatic frequency change. I need
> the mode to be set to DATA A so that the compression & Equalizers are
> disabled, ALC is optimized, and for the K3 the rear panel connectors are
> enabled. Are there other Winmor user that would like to see the WL2K
> development group make some changes to fix this problem?
>
> John Hendricks K7JLT
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to ae6lx at worldwidedx.com
>



-- 
Owner, worldwidedx.com
AE6LX, Amateur Radio
NNN0ITA, Navy MARS
NNN0GAF FOUR, Southern CA Director Assistant for Training, Navy MARS