[Elecraft] K3 and JT65 (JT9) power instability problem

[Walter Underwood]

Never confuse mathematics with arithmetic. Totally different things.  --wunder, K6WRU

On May 13, 2014, at 4:21 PM, Fred Jensen <k6dgw at foothill.net> wrote:

> I made a little mark at the 4th bar position on the display with a dry-erase black marker.  I have a really hard time counting them in real-time as I'm adjusting levels.  And yes, I have a math degree, no need for snarky "counting" comments. :-))
> 
> This subject of K2/K3/KX3 power control comes up often.  Maybe some editing in the Users' Manuals to make it very obvious and clear that "You really need to read and understand this part" would help?
> 
> 73,
> 
> Fred K6DGW
> - Northern California Contest Club
> - CU in the 2014 Cal QSO Party 4-5 Oct 2014
> - www.cqp.org
> 
> On 5/13/2014 11:12 AM, Don Wilhelm wrote:
> 
>> You must drive the audio enough to produce 4 bars with the 5th
>> flickering on the ALC meter.
>> That *is* the no-ALC point - the 1st 4 bars of that meter are there only
>> to indicate the audio level.
>> You can set the audio level without transmitting by turning on TX TEST.
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to wunder at wunderwood.org

--
Walter Underwood
wunder at wunderwood.org