[Elecraft] KX3 Charging question

[Matt Zilmer]

You might want to check the charging source voltage when this happens.
A low input voltage to the KX3 will cause LO SPPLY to pop up while
charging.

From p4 of the KXBC3's instllation manual, Error Message Table:
The external power supply voltage is too low for charging the internal
battery. If this occurs when trying to start a charging cycle, tap any
switch to clear the message. If this occurs during a charging cycle,
the charging cycle will resume automatically when the condition is
corrected.

73,
matt W6NIA


On Tue, 13 May 2014 22:18:45 GMT, you wrote:

>My KX3 is acting strange while charging.  Near the end of the charge cycle, the display starts to flicker between the remaining charge time and "LO SPPLY".  Any idea what the cause might be?
>Gerry Miller, AA2ZJ 
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>Message delivered to mzilmer at roadrunner.com
Matt Zilmer, W6NIA
--
"Give me six hours to chop down a tree and I will
spend the first four sharpening the axe." -A. Lincoln