[Elecraft] SSB/CW/PSK/RTTY Keying with N1MM

[Doug Ellmore]

I while back I figured out how to do macros in N1MM to key the K3 and KX3
internal keyer and DVR.  I posted my summary macros here:
http://ellmore.net/na1dx/?p=469

The only issue is cancelling the execution of a macro.  You can not use the
normal "ESC" key to cancel a TX like you might do with N1MM using WinKey CW
keyer or MMVARI/MTTY/FLDIGI.  For non SSB modes, you need to use an
external key attached to the K3/KX3.  I use a straight key and just give it
a quick tap.  For SSB, just hit the PTT on a mic or external PTT connector
like a foot paddle or hand switch.

I also use similar macros with NaP3 now to work PSK/FSK/CW/SSB without any
other decoder software other than the decoder built into the K3/KX3.  I run
Ham Radio Deluxe (without the Digital Master 780) and NaP3 as my
non-contesting setup and have no issues.

73,

Doug Ellmore, NA1DX
doug at ellmore.net
www.ellmore.net/na1dx