[Elecraft] K3 - Accessory Jack - How Many Wye Cables?

[Peter Chamalian W1RM]

Yes so long as you aren't trying to send the same data to two devices.  If
you are trying to send band data to two devices, I'm not sure if that would
work or not.

Currently I have one which provides my amp with band data and the other side
to my 6m preamp.  I wanted to add RTTY from my MicroKeyer II and that comes
via the ACC line so I'm awaiting the arrival of a second Wye for that.  All
three "ports" are independent data so no conflict.


Pete, W1RM

-----Original Message-----
From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of
Richard Thorne
Sent: Monday, May 12, 2014 7:48 AM
To: Elecraft Reflector
Subject: [Elecraft] K3 - Accessory Jack - How Many Wye Cables?

Currently I have a wye cable attached to the accessory jack on the back of
my K3 which in turn is connected to a microham device and the KAT-500 tuner.

I have a need to supply band data to another device, can I connect another
wye to the current wye so I can connect 3 devices to the accessory jack?

Thanks

Rich - N5ZC

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to w1rm at comcast.net