[Elecraft] KX3 won't stop scanning-- help!

[Matt VK2RQ]

Supposedly the DATA-A mode should automatically disable some of those settings, but in early versions of the firmware, this didn't seem to work properly. I haven't revisited this behaviour with the more recent firmware, so it may well be that those settings are now being properly disabled in the DATA-A mode, and that the corresponding commands in my macros have become redundant.

73,
Matt VK2RQ

> On 11 May 2014, at 10:34 pm, Joel Black <w4jbb at charter.net> wrote:
> 
> I read through the two macros on the page.
> 
> In the PKT macro, you turn off the speech processor, audio effects, and turn *on* DATA A. Wouldn't turning DATA A *on* negate the need to turn of the speech processor and audio effects? There may be other settings that are turned "off" by going into DATA mode, but I cannot remember them off the top of my head.
> 
> I don't often use the built in macros except for one thing on my K3 so maybe I'm missing something there.
> 
> 73,
> Joel - W4JBB
> 
>> On 5/11/14, 1:39 AM, Matt VK2RQ wrote:
>> I had some enquiries about the macros I am using to switch between packet and SSB mode, so I did a brief writeup on my webpage:
>> http://www.vk2rq.ampr.org/macros.html
>> 
>> 73, Matt VK2RQ
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to matt.vk2rq at gmail.com