[Elecraft] Making a Signalink cable for the K3's 8-pin mic

[Don Wilhelm]

Slava,

Yes, that would most likely work - BUT -

I would suggest that you move the input from your audio gear from Line 
In to Mic In and use the Line In for the Signalink.  Surely you have an 
output level adjustment for your audio gear that will allow mic level 
output - if not, add an attenuator.

That would allow you to select Line In as the MIC SEL fo data modes. 
and  either FP or RP mic for SSB which is the more normal setup for audio.

73,
Don W3FPR

On 5/10/2014 3:15 PM, Slava Baytalskiy wrote:
> I just had a thought: what about the rear mic jack (the 3.5mm) and the line out?
> Can that be done?
>
>