[Elecraft] Making a Signalink cable for the K3's 8-pin mic connector

[Don Wilhelm]

Slava,

Certainly that would be possible, but the output of the Signalink would 
have to be set at mic level rather than line level.

I would think it should be easier to simply use a "Y" adapter on the 
Line In of the K3.

73,
Don W3FPR

On 5/9/2014 8:36 AM, Slava Baytalskiy wrote:
> Hi Don, list!
> I wanted to ask you if it would be possible to make a cable for the Signalink USB box to connect to the K3's 8-pin front side mic connector?
> I have the Signalink box that i'm using with my Yaesu 857D but i want to also try it with the K3.
> The K3's rear line-in is currently taken by my audio stuff.
> Line out is free for now.
> I see that RigBlaster has an option of using K3's 8-pin, so i'm sure Signalink should be able to use that as well, right?
> If all the necessary pins are there i could make up a CAT5 (or even 6) cable with RJ-45.
>