[Elecraft] [KXPA100] Inventory question - spacers

[Bernie Wills]

Thanks, Don.

The labelling error probably has not bothered anyone else but I like to 
have the procedure clear before getting in too deep. I have built the 
amp since my posting yesterday and on the bench it is working nicely 
into a dummy load. Having the KXPA Utility running on the computer while 
testing is a handy feature that I was not expecting.

Bernie.
VK2WJ.

Message: 5
Date: Wed, 07 May 2014 08:20:26 -0400
From: Don Wilhelm<w3fpr at embarqmail.com>
To:elecraft at mailman.qth.net
Subject: Re: [Elecraft] [KXPA100] Inventory question - spacers
Message-ID:<536A250A.1070100 at embarqmail.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

Bernie,

Yes, the length is 1/8 inch (3.2mm).  I guess someone had a magnifier
when the manual was written  .
Look for an*errata*  coming to the Elecraft website soon!

73,
Don W3FPR

On 5/7/2014 2:45 AM, Bernie Wills wrote:

> In several places in the KXPA100 Assembly Manual, including diagrams
> and the inventory, reference is made to spacers 1/4" (6.4 mm) long.
> The inventory lists 24 of these in the kit. It seems that the size
> should be specified as 1/8" (3.2 mm). This is the size I have measured
> for the spacers supplied.