[Elecraft] KX3 and Re: K2 Keying on SSB
Wayne Burdick
n6kr at elecraft.com
Tue May 6 16:46:40 EDT 2014
This should be a simple fix -- it's near the top of the firmware list.
Wayne
N6KR
On May 6, 2014, at 12:03 PM, Jim Stahl via Elecraft <elecraft at mailman.qth.net> wrote:
> May I again make my plea to upgrade the KX3 firmware to provide the normal
> CW vox delay when using CW in SSB? Still not there in Ver 1.87.
>
> This delay is very necessary when using external transverters for VHF/UHF,
> where the ACC2 control sends the T/R closure to the transverter.
>
> I understand that the K3, and perhaps the K2, handles it properly.
>
>
> 73 - Jim K8MR
>
>
>
>
> In a message dated 5/6/2014 11:40:23 A.M. Eastern Daylight Time,
> wt5y at gt.rr.com writes:
>
> Its normal
>
>
>
> -------- Original message --------
> From: WILLIS COOKE via Elecraft <elecraft at mailman.qth.net>
> Date: 05/06/2014 10:12 (GMT-06:00)
> To: dale at k4eq.net,elecraft at mailman.qth.net
> Subject: Re: [Elecraft] K2 Keying on SSB
>
> I don't know about the K2. It is an option on the K3 and many operators
> switch to CW to finish SSB contacts or make CW contacts in the phone band
> when conditions are marginal. I have elected to have the option on my K3 and
> wish I could have it on my TS-480. If you have it on your K2, enjoy, it
> is handy and great. More used on 6 meters, but is great on other HF (and
> very legal everywhere!)
>
>
> Willis 'Cookie' Cooke, TDXS DX Chairman
> K5EWJ & Trustee N5BPS, USS Cavalla, USS Stewart
> On Tuesday, May 6, 2014 7:35 AM, "dale at k4eq.net" <dale at k4eq.net> wrote:
>
> I just discovered that when I hit my key while receiving on a sideband
> mode,
> it keys the transmitter. Is this normal for the K2? I've never had a
> transmitter do that.
>
>
>
> Dale, K4EQ
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n6kr at elecraft.com
More information about the Elecraft
mailing list