[Elecraft] K3 Kit Wisdom

[Harry Yingst via Elecraft]

You are 100% correct

That is why you should not install modules after a very long week

Thank you




________________________________
 From: Don Wilhelm <w3fpr at embarqmail.com>
To: elecraft at mailman.qth.net 
Sent: Saturday, May 3, 2014 8:35 PM
Subject: Re: [Elecraft] K3 Kit Wisdom
 

There should be no need to cut any notch in the KPA3 shield for the 2 
meter antenna cable if the K144XV instructions are followed.

73,
Don W3FPR


On 5/3/2014 8:20 PM, Harry Yingst via Elecraft wrote:
> I had to remove that standoff to get the shield out (and back in)
> so I could cut a notch in the shield for the two meter antenna cable
>
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to hlyingst at yahoo.com