[Elecraft] [OT] K3 Shack Pictures and iMacs

[David Cole]

I must also concur with Dale, et al.  I also have a set of glasses I had
the Optometrist prescribe, and I can not use my bifocals anymore, too
much head movement...  That was th best money I have spent in a long
time.  One thing you might consider is adding an AR coating to them.  

I use ONLY glass lenses, (no polycarbonate), and have them AR coated.
The coating is finally coming off my bifocals after 5 years of heavy
cleaning.  The AR coating is wonderful if you have specular lighting
events around your OP area.  With an AR coating, if you clean your
glasses right, (ultrasonic cleaner), you will not even see them...

-- 
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
for MM-SSTV see:
http://groups.yahoo.com/neo/groups/MM-SSTV/info


On Fri, 2014-05-02 at 10:08 -0400, dmb at lightstream.net wrote:
> I strongly concur w/ Bill's advice about getting a special pair of
> glasses. In my case, as a programmer, I spend all day in front of the
> computer. I have three monitors arranged in front of me, and I found that
> bi-focals definitely had a 'sweet spot' and I was always turning my head
> or looking up/down to see the screens within that sweet spot. I asked the
> eye doc to give me a prescription for single focal length glasses
> optimized for viewing a monitor 27" away. There is no 'sweet spot' and
> while looking at the center (primary) monitor directly in front of me, I
> can shift my eyes to the left or right to see the other two monitors
> without turning my head. I've had these glasses for about 5 years now, and
> they work perfectly.
> 
> Also, in my case, the K-Line is arrayed on the desktop immediately below
> the three monitors, and the central monitor (Samsung) has a front-panel
> switch that allows me to toggle it between the computer and the P3SVGA
> output.
> 
> Side comment: I seem to be in the minority w/ regard to positioning of a
> radio, in that it *must* be on the desktop and not tilted or elevated
> (with the exception of the P3). I like having my arm and hand resting on
> the table top as I tune the radio. Having to tilt my hand upward to tune a
> knob that is up in the air, or worse yet, rest my arm on my elbow while
> trying to tune a radio on a shelf is just plain wrong  ;-)
> 
> I bought a KX3 a few weeks ago and love the radio, but am struggling with
> the operating angle. It'll be fine for the field, but I need to cobble
> together some kind of stand for using it on the desktop.
> 
> 73, Dale
> WA8SRA
> 
> ...
> > Do NOT look up at monitors - it will
> > screw your neck up after a while. Also, I have specially cut glasses for
> > my radio desk. Bifocal for reading and seeing the keyboard - and the
> > upper is set to about 28 or 30 inches - the distance from your eyes to
> > the monitor and radios. Any good glasses shop can do this - it is a
> > common request.
> >
> > ...
> >
> > Bill K-Line
> >
> >
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to dave at nk7z.net