[Elecraft] Running K2/100 under PC control...

[Don Wilhelm]

Steve,

If you do not have the special cable to connect the KPA100 AUX IO 
connector to the computer, you will have to make one.  The diagram is in 
the KPA100 manual.  Do not connect a full serial cable or USB serial 
adapter directly to the KPA100 AUX IO - it is NOT a serial port, it 
contains internal K2 signals for operation of external Elecraft devices 
such as the KAT100, XV transverters, and KRC2.

If you have the KAT100, you will also need to make the end that connects 
to the KAT100 - see the KAT100 manual for a full diagram of both cables.

73,
Don W3FPR

On 3/31/2014 7:22 PM, Steve Banks wrote:
> Hi
>
>   
>
> It's been a long time since I last had my K2 connected under PC control.
> But could someone there tell me which rear-panel connectors to use and give
> me an education about how to connect to what?  I'm more than willing to
> rummage through a K2 manual if you prefer.
>
>   
>