[Elecraft] Another K3-SignaLink question

[Edward F. Steinfeld]

I asked the original question about LIN OUT levels varying with AF setting.
Here is what is configured:
LIN OUT   nor 010
AF GAIN   HI
SPHR+PH   no
SPKRS   1

The sudio level from LIN OUT still varies with the AF setting. What else can
or should I change?

Ed  --  KB1ZJK

Date: Fri, 28 Mar 2014 10:29:11 -0500
From: "Jim Miller" <JimMiller at STL-OnLine.Net>
To: "'Joe Harris'" <joseph.a.harris at gmail.com>,
	<elecraft at mailman.qth.net>
Subject: Re: [Elecraft] Another K3-SignaLink question
Message-ID: <014a01cf4a9a$78622270$69266750$@STL-OnLine.Net>
Content-Type: text/plain;	charset="us-ascii"

Thank you.  I have been using EasyPal (14.233) for the "new digital SSTV"
and have signals where I just don't receive quite enough signal to sync up
and receive the picture.  This may help me a lot.
Thanks, 73, Jim KG0KP

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Joe Harris
Sent: Thursday, March 27, 2014 2:54 PM
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] Another K3-SignaLink question

Ed,

See page 20 of the K3 manual, in the Line Out setting. You can set the Line
Out level in Config, or it can be set to =PHONES, which is what it sounds
like you have it set to.

73,
Joe, N1QD