[Elecraft] FLDIGI rig control, mic disable

[Don Wilhelm]

Jack,

Go into the main menu and turn off MIC+LINE and both mic inputs will be 
muted.
I assume you have MIC SEL set to LINE, but check that too or your data 
mode transmission will not work.

73,
Don W3FPR

On 3/27/2014 2:25 PM, Jack Berry wrote:
> Is there a way for FLDIGI to mute the front panel mic input with transmitting digital modes?
> I use FLDIGI 3.21.77 with SignaLink USB, mostly for MT63 MARS work.
> The SLUSB is connected to the Line In on the back panel. It all works well except.....
>
> While transmitting MT63 the mic remains open, normally no problem. However if a dog barks or a phone rings then all bets are off on the quality of the transmission. This is especially true if conditions are marginal.
>
>