[Elecraft] K3 interface to Signalink USB question

[Don Wilhelm]

Slava,

That all depends on whether you feed the SL USB through your mixer or go 
with the front panel mic.

Through the front panel, set the mic select to the front mic and bias 
off.  Use VOX and do not connect PTT from the SL USB and you will not 
have any PTT 'mistakes'.

If you feed it through your mixer, then it all depends on your mixer and 
its controls - I don't know your full audio (nor PTT) setup, so I cannot 
comment.

73,
Don W3FPR

On 3/26/2014 5:00 PM, Slava Baytalskiy wrote:
> Thanks everyone!
> Don, will this setup liven up the mic? Or is there a way to just switch to front panel mic input only when using SL USB? I mean I know I can set the menu option to fp mic. But if I didn't and SL USB keyed up the rig - my actual mic would be live, right?
>