[Elecraft] K3, KPA500 KAT500 Firmware Upgrades

[Dick Dievendorff]

That's about twice what I paid for an Edgeport 8, new in box, on eBay.

One advantage of the four port Gearmo (for under $50) is that it terminates in male DB9 plugs that go right onto the back of the P3 and KPA500, no added RS232 jumpers needed.  I did need KXSER jumpers for the 3.5mm Elecraft devices: KAT500, KX3, KXPA100, XG3. W2, K144XV.

Dick, K6KR


> On Mar 25, 2014, at 8:28, Doug Person <k0dxv at aol.com> wrote:
> 
> There is also a Siig brand usb to serial port unit available in 2, 4 or 8 serial ports that is far less expensive and works very well.
> 
> SIIG *-Port USB to RS-232 Serial Adapter Hub <http://www.amazon.com/SIIG-8-Port-RS-232-Adapter-JU-SC0211-S1/dp/B005PAJV5A/ref=pd_cp_e_1>
> 
> 73, Doug -- K0DXV
> 
>> On 3/25/2014 8:47 AM, Dick Dievendorff wrote:
>> Edgeport 8-port USB to Serial adapter
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to dick at elecraft.com