[Elecraft] [K3] Error Msg C00000202 DSE/DS2

[Don Wilhelm]

Tom,

Try the following:
1) download new firmware files from Elecraft
2) Load only the DSP firmware to the K3
3) once the DSP firmware has been loaded, then load the MCU and FP firmware.

I suggest this order because there may have been some changes in the MCU 
code that depend on a response from the DSP code, but the updated DSP 
code has not yet been loaded.
No guarantees, but it is worth a try.

If that does not cure it, contact support.

73,
Don W3FPR

On 3/25/2014 8:07 AM, Tom Morehouse wrote:
>
>
> Well, still stumped --- and error messages I get are E 0000202, then 
> E000A0A, with the text ERR DSE. I'm using the latest utility for the 
> mac, and the elecraft serial to usb cable....this is the first time 
> i've had an issue with downloading software in over 3 years. . . .
>