[Elecraft] stereo channel output balance

[Vic Rosenthal]

As you suggest, this only works if you are listening to main and
subreceiver audio in separate channels. It does not provide a balance
function when the speakers are both connected to the same receiver.

This is something I've asked for in the past and may even be on 
Elecraft's list. The sub AF control is presently not used at all when 
the subreceiver is off, so there is no user-interface reason why it 
couldn't be a balance control then.

I would suggest that it become a balance control regardless of whether 
the sub is on or off whenever the CONFIG:SUB AF was set to BALANCE. This 
would make the functionality more consistent.


On 3/21/2014 3:52 PM, Matt Zilmer wrote:
> Your subject didn't indicate whether you're using the K3 or the KX3.
>
> If it's the K3:
>
> If you're using the sub-receiver, you can set CONFIG:SUB AF to
> BALANCE.  This allows you to vary the level to each speaker easily.
>
> 73, matt W6NIA
>
> On Fri, 21 Mar 2014 18:37:54 -0400, you wrote:
>
>> Is there any way to control the balance on the output coming from
>> the spkr output jack on the back panel? I have a pair of KLM mini
>> monitors but one side sounds louder that the other. When I swap
>> speaker wires the other channel gets louder so I am hoping there is
>> a way to even the stereo balance if there is one.
>>
>> thanks in advance
>>
>> 73 Todd WB2ZAB
>> ______________________________________________________________
>> Elecraft mailing list Home:
>> http://mailman.qth.net/mailman/listinfo/elecraft Help:
>> http://mailman.qth.net/mmfaq.htm Post:
>> mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net Please help support this
>> email list: http://www.qsl.net/donate.html Message delivered to
>> mzilmer at roadrunner.com
> Matt Zilmer, W6NIA -- "Give me six hours to chop down a tree and I
> will spend the first four sharpening the axe." -A. Lincoln
> ______________________________________________________________
> Elecraft mailing list Home:
> http://mailman.qth.net/mailman/listinfo/elecraft Help:
> http://mailman.qth.net/mmfaq.htm Post:
> mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this
> email list: http://www.qsl.net/donate.html Message delivered to
> k2vco.vic at gmail.com
>

-- 
Vic