[Elecraft] N1MM/K3/KX3 Programming

[iain macdonnell - N6ML]

On Thu, Mar 20, 2014 at 7:40 PM, Doug Ellmore Sr. <doug at ellmore.net> wrote:
> Through N1MM and K3 software commands, I am able to send keying messages of
> specific text from n1mm to the K3.  In order to pass variables, such as the
> other station and serial number, I need help to figure that out.
>
> winkeyer command example to send cq from N1MM:
>
> F1 RUN CQ,*cq {CQ MYCALL} {MYCALL} TEST*
> K3 Command sent to K3 on com1 from N1MM:
>
> F1 Run CQ,* {CATA1ASC ky cq na1dx na1dx test;}*
> What I need to do is send the variable {TX} which is the station to work

(in addition to Rich's comments:)

{TX} is not a variable, and has nothing to do with the station you're
working - rather it is a macro symbol that asserts PTT to the
transceiver. It is not necessary to assert PTT to the K3 utilise the
KY command.

http://n1mm.hamdocs.com/tiki-index.php?page=Macros&structure=N1MM+Logger+Documentation

73,

    ~iain / N6ML