[Elecraft] P3 & marker B transmit freq.

[Vic Rosenthal K2VCO]

One reason for doing this is so that you do not have to use SPLIT, which 
turns QRQ mode off. QRQ mode produces 'cleaner' QSK even at slower 
speeds, and is pretty much necessary over about 35 wpm to avoid badly 
malformed CW.

This is one of the 'rough edges' of the K3 which has to do with the time 
it takes the synthesizers to reliably change frequency.

I use macros to take me into/out of "pileup mode', including activating 
the subreceiver, putting the appropriate signals into the right and left 
channels, moving up two kHz, etc. One minor problem is that the sub 
balance control works backwards for my preferred placement of DX in the 
left ear and pileup in the right.

I am not totally happy with this situation, but QRQ mode is important to me.

On 3/19/2014 12:18 PM, Ian White wrote:
> Forgive me, but I don't understand why anyone calling in a pileup would
> ever wish to use the main RX to tune the pileup, while listening to the
> DX station on the 2nd RX.
>
> The K3's Main RX and 2nd RX are identical in performance; but they are
> not identical in ease of use. It always takes a few seconds more to
> reach the functions of the 2nd RX because of the BSET button.
>
> We need to ask ourselves: which station do we need hear the best; and
> why?
>
> The DX station that we are trying to work is the ONLY station that we
> need to copy accurately and in detail. That station is also likely to be
> quite weak, and these days we may also be fighting deliberate, malicious
> QRM on the DX station's own frequency. For all of those reasons, surely
> it makes sense to listen to the DX station on the Main RX (VFO A) where
> all of the K3's QRM-fighting tools are instantly to hand?
>
> The 2nd RX is completely adequate for tuning the pileup because we
> aren't listening for details there. We only need to find where a station
> is sending "599" and "TU", to help us judge where and when to place our
> own call. We don't need to copy any further detail, so why waste the
> Main RX on tuning the pileup?
>
> For tuning the pileup with the 2nd RX, I have always found my saved
> Normal passband settings to be completely adequate, and have never felt
> the need to change them on the fly. There isn't time to do that anyway,
> because in the next few seconds everything will have moved on.
>
> Maybe this is all a habit, developed from using older transceivers with
> a very inferior 2nd RX... but it still seems to make good sense today.
>
>
> 73 from Ian GM3SEK
>
>
>> -----Original Message-----
>> From: elecraft-bounces at mailman.qth.net [mailto:elecraft-
>> bounces at mailman.qth.net] On Behalf Of Vic Rosenthal K2VCO
>> Sent: 19 March 2014 14:26
>> To: elecraft at mailman.qth.net
>> Subject: Re: [Elecraft] P3 & marker B transmit freq.
>>
>> This is what I've learned to do. The only problem is that once you
> enter
>> this mode, if you want to fool with selectivity, APF, shift, etc. to
>> hear the DX better, you must press BSET first.

-- 
73,
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco/