[Elecraft] Computer won't connect with kx3

[Don Wilhelm]

Correction Bob,
The KX3 is capable of up to 38400 baud rate.  Check the KX3 RS232 menu 
parameter.
Yes, it defaults to 4800, but for firmware downloads, it is 
automatically set to 38400.
Set it to whatever your control application is using.

73,
Don W3FPR

On 3/18/2014 9:51 PM, Bob N3MNT wrote:
> Check the baudrate.  The KX3 used a lower baud rate.  The KXPA100 connection
> needs 38400.
>
>