[Elecraft] Computer won't connect with kx3

[Don Wilhelm]

Roger,

That sounds like you might have a bad KXUSB cable.
You may have 2 of them, one which came with the KX3 and another that 
came with the KXPA100.
Try both of them on the KX3 alone.  If it works there, then introduce 
the KXPA100 to the same cable.
Do not change USB jacks - often the operating system will change the 
assigned COM port if you change the USB port that the cable is plugged into.

73,
Don W3FPR

On 3/18/2014 3:23 PM, Roger Brisson wrote:
> I received my KXPA100 with tuner and hooked it all up.  I use macloggerDX for logging and connection to my kx3.   I plug the computer into the kxpa100 where it shows but the computer does not find the kx3.  I check the serial port and it is the same I was using before.  I downloaded the driver again and still not making a connection.  I then tried connecting directly to the kx3 but still not finding it?
>
>