[Elecraft] P3 forgets set ranges in Fixed Track mode (WARC)

[Fred Jensen]

Mine sort of, kind of, does the same or similar thing although I've 
never noticed a correlation with operation on 10.  I normally run 
fixed-track with a 20 KHz span starting at the bottom of each band 
[don't operate 17 or 24 much].  Sometimes, it seems more frequent if 
I've been jumping around from one band to the next a lot, instead of 
7.020 on the left, I'll see 7.025 or 14.025.  Almost always [maybe 
always] 5 KHz.  I too cannot pinpoint exactly what causes it.  Happens 
with 50 KHz spans too.

73,

Fred K6DGW
- Northern California Contest Club
- CU in the 2014 Cal QSO Party 4-5 Oct 2014
- www.cqp.org

On 3/15/2014 10:16 AM, Bill Hammond wrote:
> As a CW operator, I keep the P3 in fixed track mode covering the
> lower 50 Khz of each band.  From time to time the P3 forgets the
> setting on the 17 and 12 meter bands only.  I'm wondering if i am the
> only person that has experienced this issue.  I can't pinpoint
> exactly how this happens but I am usually operating on 10 meters when
> I change bands and discover 12 and 17 have had the fixed track
> frequency I set disappear.