[Elecraft] P3 forgets set ranges in Fixed Track mode (WARC)

[Bill Hammond]

As a CW operator, I keep the P3 in fixed track mode covering the lower 50 Khz of each band.  From time to time the P3 forgets the setting on the 17 and 12 meter bands only.  I'm wondering if i am the only person that has experienced this issue.  I can't pinpoint exactly how this happens but I am usually operating on 10 meters when I change bands and discover 12 and 17 have had the fixed track frequency I set disappear.  

I have never complained before as the reset has been infrequent.  Now, with 10 open, I find this problem occurs daily, sometimes two or three times a day.  Not an earth shattering problem as the  P3 works fine and I change the setting back, just an irritant.  I'm wondering if it is just my station or have others experienced this, remedy anyone?

73,

Bill Hammond
wham727 at aol.com
Bill Hammond-AK5X
ak5x at mac.com
ak5x at sbcglobal.net
K3 #69
K3/0 # 200
P3 #817
KPA500 # 149
KAT500 # 290
K2/100 #4637
K1 #2033
KX1 #1023
KX3 #583
W2
T1