[Elecraft] K3 and AL600 hook up.

[Joe Subich, W4TV]

ARI-500 works if your ALS-600 is the newer one with provision for
remote switching.  The original LPF board was not relay controllable.

You can also use the W9XT BCD-10 and source driver boards if you're
willing to do a little packaging work.

73,

    ... Joe, W4TV


On 3/14/2014 2:50 PM, Jorge Diez CX6VM wrote:
> I use Ameritron ARI-500 With the ALS1300 for that.
>
> I think you need the same for AL600
>
> 73,
> Jorge
> CX6VM/CW5W
>
> Enviado desde mi TELÉFONO
>
>> El 14/03/2014, a las 15:30, Stan Grigaliunas <sgrigali at columbus.rr.com> escribió:
>>
>> I have my K3 hooked up to the AL600 and it works great.  Now I would
>> like to add the auto band switching.  Has anyone done this and how does
>> it work out?  Did you home brew the cables or is there a supplier that
>> sells them?  Any help would be appreciated.
>> 73
>> Stan - K8SRB
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>