[Elecraft] Button of no return

[Roger D Johnson]

Page 63 of the manual. if you have anything on the ACC connector it must be
removed for this to work.

On 3/13/2014 11:15 AM, bwruble at gmail.com wrote:
> Can you tell me where to find the "procedure" just in case?
>
> 73 De Brian W3BW
>
>
> Brian F. Wruble, C.F.A.
>
> "Leap and the net will appear."
>
>> On Mar 13, 2014, at 10:21 AM, Roger D Johnson<n1rj at roadrunner.com>  wrote:
>>
>> I do not dislike Power Poles and use them for many cords around my station. The problem is that
>> my K3 is fed from the power supply using large (stiff) diameter conductors. Brushing up against
>> these can cause them to disconnect from the K3. If the K3 is powered up, this can result in the K3
>> going off to never-never land which requires a special, and not well documented, procedure to
>> get it running again. I think the K3 needs a better connector here.
>>
>> 73, Roger
>>
>>
>>> On 3/13/2014 9:52 AM, Mike Harris wrote:
>>> Not a flame just a simple power pole observation.
>>>
>>> Never had a problem, never fallen out (K2, K3, XV50) even when tugging units around, soldered not crimped, no $40. crimper, not colour blind so arranged the cable and connectors to match the equipment.
>>>
>>> Each to his own I guess.
>>>
>>> Regards,
>>>
>>> Mike VP8NO
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html