[Elecraft] Microphone settings K3

[Dick Dievendorff]

Command macros are intended for situations just like this.  See K3 Utility
Help, Command Tester/K3 Macros. 

Some clever owners have found ways to use two or more command macros and
need only one button to toggle between them.  There's a link to a couple of
these articles in K3 Utility Help.

73 de Dick, K6KR


-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of PA2V
Sent: Tuesday, March 11, 2014 10:12 AM
To: elecraft at mailman.qth.net
Subject: [Elecraft] Microphone settings K3

Hello group.

 

I am using a headset microphone during contests connected to the rear
connector.

During "normal" operations I like my hand microphone most that is connected
to the front panel.

 

Both microphones have different elements and settings.

As far I could discover it is not possible to store different settings in
the K3 for the rear or front connector.

My only option so far would be to store the setup in the PC and upload the
one I need. (not very handy)

But wouldn't it be handy to store it in the K3?

Any ideas?

 

73, Peter PA2V

 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html