[Elecraft] ELECRAFT K3 - LAPTOP SINGLE RS232 PORT - WITH WRITELOG AND PROPOSED P3 OPERATION

[Don Wilhelm]

John,

Remove the RS-232 cable (PC) from the K3 and plug it into the P3. Use 
the supplied RS-232 cable between the P3 and the K3.  All should be well.

73,
Don W3FPR

On 3/6/2014 6:18 PM, JOHN POWELL wrote:
> Presently I am running the above, primarily as the K3-Laptop-Wtitelog operation, and wanting to interface the P3 into the station configuration. The vexing question is how ?, hence this enquiry for a possible
> solution . Your thoughts will be greatly apreciated to relieve a somewhat tired brain !!.
>
>