[Elecraft] Connecting P3 to a K3

[Tom]

Hi
No you do not need a Y cable to connect the P3. You connect to a serial cable between them and the p3 then connects to the MicroHam. 
73s Tom 




-------- Original message --------
From: Richard Thorne <rthorne at rthorne.net> 
Date: 05/03/2014  08:37  (GMT-05:00) 
To: Elecraft Reflector <elecraft at mailman.qth.net> 
Subject: [Elecraft] Connecting  P3 to a K3 
 
I just ordered a P3.

I believe I need to order the y cable as well but I'm not sure.

I've down loaded the manual and I can't find the wiring diagram between 
the P3 and K3, specifically the nice picture of the back of the units 
showing how everything is connected.

I am already using one y cable so my Microham keyer and KAT-500 can 
share the accessory jack.  I'm also already using the RS-232 port for my 
Microham keyer.

Do I need another Y cable?

Thanks in advance.

Rich - N5ZC



______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html