[Elecraft] K7HP K3 FSK-D

[Don Wilhelm]

Yes, that input should be a 5 volts, there is a pullup resistor on it.
Since it is in the range of 3 to 4 volts, either the pullup resistor is 
damaged (not likely) or the input on the IC inside the K3 is dragging 
the voltage down.

73,
Don W3FPR

On 3/1/2014 4:01 PM, Pfizenmayer wrote:
> Sleep deprived - has been pointed out pin 1 is FSK and 4 is PTT - yep - I checked the right pins - just transposed numbers when typed , pin 1 just drifts up . Pretty sure it should be pretty solid 5 open circuit.
>
>