[Elecraft] Using K3 with KPA500 off.

[Rick Tavan N6XI]

Yes, absolutely. When the KPA500 is powered off, the transceiver is
connected straight through to the antenna (or tuner if installed).

/Rick


On Sat, Mar 1, 2014 at 8:03 AM, AD0ES <ad0es at ad0es.net> wrote:

> Hi,
>
> I just ordered a KPA500.  As I normally run barefoot, I was hoping that I
> could transmit/receive with the KPA500
> totally off (ie, NOT in standby).  After reading that it uses PIN diodes
> in its TR switch as opposed to a mechanical
> relay that would be off when unpowered, I thought I should confirm proper
> practice.
>
> Can I keep the KPA500 plumbed between the K3 and KAT500, but OFF while
> using just the K3/KAT500?
>
> 73
> Steve AD0ES
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>



-- 
Rick Tavan N6XI
Truckee, CA