[Elecraft] KX3 - UHF emissions

[Darren Long]

Hi Dave,

I've have just repeated my measurements of the 7.080Mhz sprog on 398.4MHz and
posted some screen-shots on my blog.  See here:
http://www.g0hww.net/2014/06/kx3-uhf-emissions.html

Cheers, 73

Darren, G0HWW




On 28/06/14 10:30, Dave wrote:
> Hi Darren,
> 
> I have a later KX3, number 5111, with similar options to you, built in ASTU and
> KX3 hardware, but I don't have the battery charger or additional heatsink options.
> 
> I built mine from the kit.  It was very straight forward but I did buy an
> anti-static mat first.
> 
> BTW - I made a mistake in labelling those pictures! The 1st is KX3 off and the
> second KX3 on.  I'll issue an ammendment just in case it causes confusion later.
> 
> Good luck in tracking it down, I would be interested to see your screen grabs
> showing the effects that you are seeing between on and off, so that I can
> compare them to my own results.  I'm downloading updated software for the RF
> Explorer, which may improve the resolution of the pictures.
> 
> Cheers - Dave (G0DJA)
>