[Elecraft] KX3 - UHF emissions

[Dave]

Very sorry, there's a typo in my message.

The 1st screen shot (timed at 11:22) is with the KX3 off and the one at 
11:23 is KX3 on.  Sorry for the confusion.

Dave (G0DJA)

----- Original Message ----- 
To: <elecraft at mailman.qth.net>
Sent: Friday, June 27, 2014 10:39 AM
Subject: Re: [Elecraft] KX3 - UHF emissions


> Here are two more screen grabs for KX3 on and off, but just looking at the 
> frequency range 100MHz to 500MHz.  Everything else is the same between the 
> test done earlier.
>
> KX3 on 
> https://dl.dropboxusercontent.com/u/65397105/KX3%20Test%2027-06-2014%201122.jpg
>
> KX3 off 
> https://dl.dropboxusercontent.com/u/65397105/KX3%20Test%2027-06-2014%201123.jpg
>
> I can't see any additional frequency peaks and moving the VFO on the KX3, 
> or changing the band, doesn't appear to make any difference to the display 
> on the analyser.
>
> So, I can say that I'm not seeing seeing any distinct frequency spikes, 
> which vary as I tune the KX3 VFO up and down, as Darren is seeing from his 
> KX3.
>
> Dave (G0DJA)
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to dave at g0dja.co.uk