[Elecraft] N1MM lack of instructions

[Gary K9GS]

Kevin,

Did you look at the "Getting Started" documentation at:

http://n1mm.hamdocs.com/tiki-index.php?page=N1MM+Logger+Documentation

It's pretty foolproof.  For specific information on interfacing with a 
K3 see:

http://n1mm.hamdocs.com/tiki-index.php?page=Supported+Radios#K3 
<http://n1mm.hamdocs.com/tiki-index.php?page=Supported+Radios#K3>


On 6/27/2014 7:59 PM, Kevin wrote:
> I finally guessed the correct setup.  No searching of N1MM's 
> documentation helped at all.  It was simply guessing which made the 
> setup work.
>
> Since COM1 is used by the Elecraft K3 and the Winkeyer uses COM4 I 
> thought COM1 should be set as the CW port.  No, this is incorrect. It 
> is solely the control port and not the CW port.  What is necessary is 
> to go into setup from the Configure panel and check one box.  That box 
> says Winkey.  I have yet to find this explained anywhere or by 
> anyone.  It was just random chance that lead me to the dialog box I 
> needed.  I picked COM4 and setup to get there. Once I checked the 
> Winkey box I was able to use CW from the N1MM application.
>
> Now how many more hours will it take before I discover how to load a 
> Field Day template?  Does anyone use N1MM for a contest logger?
>
> Kevin.  KD5ONS
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to garyk9gs at wi.rr.com
>

-- 


73,

Gary K9GS

Check out K9NS on the web:  http://www.k9ns.com
Greater Milwaukee DX Association: http://www.gmdxa.org
Society of Midwest Contesters: http://www.w9smc.com

************************************************