[Elecraft] Questions regarding my new KX3.
Jack.f6ajw
jack.f6ajw at gmail.com
Mon Jun 16 17:15:04 EDT 2014
Sorry for too early sending of my previous message.
I continue....
Envoyé de mon iPhone
> Le 16 juin 2014 à 23:08, "Jack.f6ajw" <jack.f6ajw at gmail.com> a écrit :
>
> Thank you for your responses, Wayne ; comments on your text.
>
> Envoyé de mon iPhone
>
>> Le 16 juin 2014 à 20:37, Wayne Burdick <n6kr at elecraft.com> a écrit :
>>
>> "Jack.f6ajw" <jack.f6ajw at gmail.com> wrote:
>>
>>> I have some questions regarding my new KX3 (I love it!).
>>>
>>> 1) how could I use my KX3 on 472 kHz (new band freshly opened in France) in transmit mode even at low power like on a TS-590?
>>
>> The KX3 doesn't have sufficient filtering for transmit at 472 kHz, nor much gain at this frequency in the PA. I would suggest using an external transverter for this band. For receive-only use, you could add a 500-kHz low-pass filter to eliminate any images due to local oscillator harmonics.
>
> RR, so usable only in receiving mode and with external filter but no luck for TX without external transverter.
>>
>>
>>> 2) regarding the 2 meter option for KX3 (which will be available in September, as far as I know), I would like to use it with DB6NT Microwave transverters which could be controlled in TX mode thanks to a + TX voltage of 5 to 12 V on the inner conductor of SMA antenna with a very low current (to the base of a low-power switchîng transistor). My FT-817 was modified this way on BNC output injecting +5V TX through a 4.7kR and a 1nF in order to prevent DC to enter receiver.
>>
>> Yes, the KX3-2M (and -4M) module will include a switchable DC voltage at the antenna.
>
> Very good! 4m version will be interesting for Hams in some coutries in Europe which have 4m allocation. Except IC-7000 and may be FT-847, no dedicated 4m transceiver is available so congrats for that!
>>
>>
>>> 3) same question regarding BNC output as 28 or 50 MHz could be also used as IF for 70 / 23 cm transverters .
>>
>> Sorry, there's no provision for DC at the BNC output of the KX3.
May be available in the future?
73's
Jacques F6AJW/Paris
>>
>> 73,
>> Wayne
>> N6KR
>>
>>
More information about the Elecraft
mailing list