[Elecraft] K3 - macro needed for RX mute

[Dick Dievendorff]

I learned from a customer that you can set PF1 to toggle SPKR+PH without a
specific macro:

HOLD MENU for CONFIG, then rotate VFO B to SPKR+PH. Then hold the RIT/PF1
button. That assigns PF1 to toggle the current menu selection.  Exit the
menu, then try HOLDing RIT/PF1 a couple of times.

73 de Dick, K6KR

<-- snip ->

I have my PF1 loaded with the following macro: MN097;DN;MN255;

It toggles SPKR+PH on and off.  I leave headphones plugged in all the time
and usually use them, but you could still use this macro even if you don't
use headphones.

-----Original Message-----

I need a toggle style macro to mute/unmute the RX audio on my K3...