[Elecraft] [KX3] Seapac Options

[Jim H via Elecraft]

Hi all,
For those who didn't go to Sea Pac and see the new options here is a visual 
 report.
The 2/4m option is the credit card size mounted on the ATU module. It's not 
 much over 1/8" in thickness. 
I don't know if it was the 2m or 4m option. Suspect it was a 2m.
The PX3 looks like shrunken P3. The front looks the same just smaller. The  
I/O is on the left side with lots of ports. The cabling needs to have right 
 angle plugs on both ends as the units will be spaced out quite a bit. I 
was able  to get Dick to open the PX3 to check out the internals. NO batteries 
external  power only. There is some room inside, but who knows what other 
options will go  inside? Like the P3 when first introduced maybe in the 
future Ext monitor  card. There was two boards inside one next to the screen and 
another smaller  card for power and I/O. The power uses the similar plug and 
cable used on the  KX3. The display wasn't bright, it was in a bright 
building.
 
73
Jim H
K7SSS