[Elecraft] Elecraft K2 filters?

[Don Wilhelm]

Gavin,

As has been explained by a couple others, the K2 filters (other than the 
OP1 filter on the KSB2 option board) are entirely user configurable - 
you can set the filter width and the filter center frequency as you 
desire.  You can find information for doing that at my website 
www.w3fpr.com in part 3 of the article on K2 Dial Calibration.  If you 
need Spectrogram, the download link to my local files can be found near 
the bottom of the opening page.

Additional information on aligning the K2 filters can be found on Tom 
"Hammond N0SS's (SK) website.  The content of his website is being 
preserved by the Mid-Missouri Radio Club as part of their website - see 
http://www.mmccs.com/mmarc/n0ss/.

73,
Don W3FPR

On 6/1/2014 9:17 PM, gavin & barbara williams wrote:
> As far I know I cannot see any filter options for the K2, am I correct?
>   
> Currently looking at a K2 sn low 4XXX.
>   
> It is advertised as ....It has 1.7kHz, 700Hz, 400Hz and 100Hz filters fitted
> .....
>   
> Is this possible.
>   
>