[Elecraft] K2-10 - KXPA100 - AMERITRON AL811H?

[Michael Eberle]

I put my KPA100 and KAT100 in a separate EC2 enclosure.  This allows the 
K2/10 to be unhooked and taken portable.  It also provides the key out 
jack for driving a larger amp in the shack.

Mike
KI0HA


On 7/31/2014 6:22 PM, Dean wrote:
> My K2-10 is my backup rig. It has an internal homemade transistor amp keyer that keys the AL811H when 100 watts is needed.
>
> I would like to add the KXPA100 to have the option to fully drive the AL811H when needed, or to run 100 watts without tuning the larger amp.
>
> What would be the best way to key both amps at the same time?  Any other considerations that I should know for setting up this configuration? For those that may ask,  the reason I want to use the KXPA100 instead of the internal K2 amp is so the radio will still be available for qrp backpacking and such.
>
> Thanks for your help!
>
> Dean
> KG7MZ
>
>
> Sent from my Galaxy Note III
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to mteberle at mchsi.com